To select a menu, press the center menu button. The up and down directions toggle the on-screen arrow up and down. Help & troubleshooting for channels on your Roku device, including adding/removing channels, logging in to, authenticating, or activating a channel, channel-specific playback issues, assistance contacting channel publishers to report issues, and adjusting channel-specific settings. Use the toggle switch to navigate the OSD menu. Return: Allows the user to exit the OSD menu or return to previous screens. Sets privacy settings, motion detection, shading, color bards and lens adjustments. Special: Controls system settings related to display output, color space CVBS, etc. Image: Sets sharpness, color gain, and display output settings for the camera. White Bal: Regulates preset color temperatures for the camera.īacklight: Sets backlight settings for the camera.ĭNR: Sets the noise reduction settings for the camera.ĭay & Night: Sets preset day and night delays for the camera. Lens: Sets the levels and mode of the lens such as, deblur and normal.Įxposure: Sets how light or dark the image will appear. Here is a brief description of each feature located in the OSD menu: To access the OSD menu for your camera, press the menu (1) button and hold for 3 seconds. Most Amcrest products function in CVI so it is recommended to keep the camera in CVI mode for best results. Using the arrow buttons, scroll to Settings & Support (if you dont see the Settings &. To switch to AHD or analog, press and hold the menu (1) button and move the switch to the right (4). Spectrum Guide: Troubleshooting Guide Issues Press Menu on your remote. Step 2: After selecting the Setting option, you will see the 'Settings' screen.
Once again select the 'Setting' icon in the upper right corner. After selecting Main Menu you will be presented with the Main Menu window. To switch to TVI mode, press and hold the menu (1) and move the switch to the left (3). 'Main Menu' at the bottom as you just did on the 'Setting the Date/Time' tutorial. To switch the camera to CVI mode, press and hold the menu (1) button and move the switch upward (2). The camera can be switched between TVI, CVI, AHD, and Analog modes, depending on the device it is hooked up to, using the toggle switch. Internet or your Network to the DVR you cannot access this menu until you disconnect.
#CANNOT ACCESS MENU SETTINGS ON DVR SOFTWARE#
Attached to these devices are an instructional set highlighting the basic uses of the toggle switch: If the PC View software is connected over the. After the device powers on, if there is no menu or only has. This toggle switch is used to access the OSD menu as well as manually control and switch between different modes on your camera. about time zone and time setup, IP information, record quick setup and HDD information page. Most Amcrest Analog 4-in-1 Varifocal cameras, such as the AF-2MBC-VARIW, will come equipped with a toggle switch.
0 kommentar(er)
